Mechanism purification board core material names: EPS, XPS. Rock wool, glass wool, paper honeycomb, aluminum honeycomb, glass magnesium mesh and other core materials. Four sides can be sealed according to customer needs, and reinforcing ribs can be used in the middle of the board. The board surface has good flatness and high strength, and it has a good fire resistance effect.

Application scope: This product is lightweight, has good flatness, and good fire resistance. It is suitable for clean rooms in industries such as electronics, food, medical, industrial plants, energy, and machinery

Product advantages:
When the finished product of the mechanism purification board is susceptible to mechanical wear and tear in outdoor insulation, it is advisable to use metal or plastic wrapping, and then pay attention to the local joints and sealing of the seams. If necessary, rubber seals should be added, and the stacked part of the wrapping layer should not be less than 100mm. When the insulation policy is placed at a 90 degree angle and there is a certain height, the insulation layer of the purification board must have positioning pins or support rings, and the distance must not be greater than 3 meters, to prevent the insulation material from sliding down in case of a sensation; In order to achieve the policy of minimizing heat loss, the joints between the mechanism purification board and the felt must be tightly connected. If there are multiple layers of insulation, the cross joints need to be staggered to prevent the formation of thermal bridges. It is necessary to eliminate cold bridges during insulation.